Design the circuit (by choosing kn for the NMOS and the value of Rs) so that lo = 1.2 mA and Vos=2.7V. The NMOS has VT=1... 查看全部
a) Plot the signals given below (manually). (2 marks) x(t) = 2u(t) - 2u(t - 1) r(t) = {uce) – žuct – 2) b) Compute the c... 查看全部
If a pure sinusoidal wave is applied at the input of the circuit of the following circuit and if the gain-bandwidth prod... 查看全部
Question NO 2 (ZU MIRS) Figure 2 shows a power system with all the relevant equipment parameters. Using the information ... 查看全部
Derive Delta-star and star-Delta transformation
typo: it's figure 3 for thatpicture2. The two voltage sources shown in Figure 3 are pressure sensors where, for each sou... 查看全部
2. The two voltage sources shown in Figure 3 are pressure sensors where, for each source and with Vin=6V, R1 = R2 = 10k ... 查看全部
1. (a) A voltage regulator is required to provide a constant voltage of between 4.2 and 4,8V to a system drawing 250mA. ... 查看全部
How to solve this question?By using D flip-flop, design a synchronous counter circuit thatcount as follows: 2,4,3,6,1,7.... 查看全部
Example 4.2: Calculate the Phase Voltages of an Unbalanced Three- Phase System in terms of the Sequence Components of th... 查看全部